Thermostat terneo sn 32 А

Сurrent:32 A

Shipping options

Calculated individually for your region


3 years from sale date

Opportunity to get samples and promotional materials

Manufacturer official website

You are on the official website of terneo and ZUBR brands manufacturer! Order directly from the manufacturer!

  • Product info
  • Characteristics
  • Testimonials

Safe in winter with terneo sn

The thermostat is designed to work with anti-icing and snow melting systems of increased power (up to 7000 VA). Provides optimal operation by adjusting the temperature range at which icicles or ice on the ground  can be formed. You do not waste electricity when the temperature outside is too low or sufficient for natural melting.

Short video overview

Easy operation

The thermostat is set up with only three buttons! The digital screen displays temperature and system notifications, and simplifies menu navigation.

Easy installation

The package includes a thermostat and a temperature sensor with a connecting wire. The device is mounted on a standard 35 mm wide DIN-rail, and the temperature sensor is located outside the house in a place without direct sunlight and precipitation influence.

Overheating protection

If the temperature inside the housing reaches 80 ° C, the device will be disconnected. The "oht" will be displayed on the screen 1 p/s. To resume operation, the temperature must drop to 60 ° C. If the protection works more than 5 times, the thermostat will turn off until the temperature drops 60 ° C and one of the buttons is pressed.

Universal thermostat

You can use it with heating cables from most manufacturers. The device can work with analog (R10) or digital (D18) sensors.

Technical properties of terneo sn

Sphere of application:
for snow melting system
Type of control:
Installation method:
on the DIN rail
Fusing current:
Upper limit of temperature setting:
0...+10 °C
Lower limit of temperature setting:
-20...-1 °C
Maximum load power:
7000 VA
Supply voltage:
230 V ±10 %
Weight of full package:
0,285 kg ±10 %
Overall dimensions (W x H x D):
53 x 85 x 66 mm
Temperature sensor:
NTC thermo-resistor 10 KOM at 25 °C (R10)
Length of connection wire of sensor:
4 m
Number of actuations under load, not less than:
100 000 cycles
Number of actuations without load, not less than:
1 000 000 cycles
Range of measured temperatures:
-30...+90 °C
IP rating according to GOST:
IP 20
Supply package:
Thermostat, temperature sensor with connected sensor, warranty certificate, technical passport, instruction, the packing box

Reviews and questions

Write a testimonialAsk a question

Users have not yet reviewed this product. Be the first one to write a review, or ask a question!

Leave a testimonial
Ask a question
User guides
Download as PDFEN
Video guideWatch