Three-phase voltmeter ZUBR V3

Digital three-phase voltmeter

Three-phase voltmeter ZUBR V3 is designed to monitor three-phase network voltage and phase rotation order. The voltmeter is an indicator; it does not protect against voltage surges, but only measures and displays.

Easy operation and information content

The voltmeter is operated by three buttons. The upper button displays the maximum voltage value since the last reset and the lower button displays the minimum voltage value. The values are reset by the middle button. The voltmeter is equipped with non-volatile memory, so turning off the power does not lead to a loss of data on critical voltage values.

Calibration of displayed voltage

You can adjust the value of the displayed voltage according to your control device.

Safe operation

Housing of three phase voltmeter is made of nonflammable polycarbonate. This increases safety when using the device.

Simple installation

Installation of ZUBR V3 voltmeter is realized in a switchboard on a standard 35 mm wide DIN rail. If there is a possibility of water entering the voltmeter in the room, then the board must comply with standards of the ІP55 protection class according to GOST 14254.